[fltsim.0]
title=Airbus A300-600 Thai Airways
sim=a306Rge
model=
panel=
sound=
texture=
checklists=

[forcefeedback]
stick_shaker_magnitude=3000
stick_shaker_direction=0
stick_shaker_period=111111
gear_bump_nose_magnitude=3000
gear_bump_nose_direction=18000
gear_bump_nose_duration=250000
gear_bump_left_magnitude=2700
gear_bump_left_direction=35500
gear_bump_left_duration=250000
gear_bump_right_magnitude=2700
gear_bump_right_direction=00500
gear_bump_right_duration=250000
ground_bumps_magnitude1=1600
ground_bumps_angle1=8900
ground_bumps_intercept1=3.0
ground_bumps_slope1=0.20
ground_bumps_magnitude2=400
ground_bumps_angle2=9100
ground_bumps_intercept2=1.075
ground_bumps_slope2=0.035
crash_magnitude1=10000
crash_direction1=01000
crash_magnitude2=10000
crash_direction2=9000
crash_period2=75000
crash_duration2=2500000

[jet_engine]
thrust_scalar=1.131

[flight_tuning]
pitch_stability=0.751
roll_stability=0.920
yaw_stability=0.820
elevator_effectiveness=1.401
aileron_effectiveness=2.101
rudder_effectiveness=2.701

[WEIGHT_AND_BALANCE]
empty_weight = 196025		// (pounds)

reference_datum_position     =   0.0,   0, 0	
empty_weight_CG_position     =   0.0,   0, 0    

station_load.0 =  0420,  41.00, 0.0, 0.0	//Weight Crew (lbs)  LEAVE
station_load.1 =  4000,  19.00, 0.0, 0.0	//Weight Galleys(lbs)    LEAVE
station_load.2 =  8000,  28.00, 0.0, 0.0	//Weight Baggage 1 (lbs) Baggage A     |
station_load.3 = 18000,   3.00, 0.0, 0.0	//Weight Baggage 2 (lbs) CARGO         |
station_load.4 =  8000, -40.00, 0.0, 0.0	//Weight Baggage 3 (lbs) Baggage B     |
station_load.5 =  6340,  25.00, 0.0, 0.0	//Weight Psgr Sect OA (lbs) First ---- |--140 lb PER PASSANGER 
station_load.6 = 9220,  30.00, 0.0, 0.0	       //Weight Psgr Sect OB (lbs) Mabuhay Class|
station_load.7 = 14480,  18.00, 0.0, 0.0	//Weight Psgr Sect OC (lbs) Economy A  |
station_load.8 = 13480, -83.00, 0.0, 0.0	//Weight Psgr Sect OD (lbs) Economy B  |


//total load= 81,940lbs + ZFW 196,025= 277,965lbs or 126,348kgs


[electrical]

max_battery_voltage = 28.0
generator_alternator_voltage = 28.0
max_generator_alternator_amps = 40.0
avionics_bus = 0, 0, 1
avionics = 1, 0, 1
starter1 = 0, 0, 1
starter2 = 0, 0, 1
fuel_transfer_pump = 0, 0, 1
flap_motor = 0, 0, 1
gear_motor = 0, 0, 1
autopilot = 0, 0, 1
pitot_heat = 0, 0, 1
additional_system = 0, 0, 1
marker_beacon = 1, 0, 1
gear_warning = 0, 0, 1
fuel_pump = 0, 0, 1
light_nav = 0, 0, 1
light_beacon = 0, 1, 1
light_landing = 0, 0, 1
light_taxi = 0, 0, 1
light_strobe = 0, 1, 1
light_panel = 0, 0, 1
auto_brake = 0, 0, 1
standby_vacuum = 0, 0, 1
hydraulic_pump = 0, 0, 1
light_recognition = 0, 0, 1
light_wing = 0, 0, 1
light_logo = 0, 0, 1

//aircraft.cfg file by Peter Binamira. Must be used with the PA A300-600R aircrafts. 09/30/01
//PA A300-600R .air files won't be optimized without this aircraft.cfg file.